Call Us Now! +86-551-63853683 Sales@climatechambers.com
You are here:Home >> Support >> Latest News

Support

Support

Contact Us

Symor Instrument Equipment Co.,Ltd
Email: Sales@climatechambers.com
Tel: +86-551-63853683, 68663630
Shanghai office 
No.3215,Huhang Highway,Fengxian District, Shanghai, 231417,China
Hefei office
No.105 Dayang Industrial Park
Luyang District, Hefei, 230041, China

Latest News

Five points need to know when using drying oven

Drying oven,we also call air circulation oven,forced air oven,hot air oven,or convection oven.
Now there are wide application of drying oven in different industries,but some products are not suitable to be placed in drying oven, there are also a lot of attention, the following list,we brefily introduce 5 points during the use of drying oven, we hope you can benefit from these:

1. flammable and volatile chemicals do not put into the oven,

2. if there are abnormal situation,such as bad smell, smoke,big noise in the process of use, please immediately turn off the power supply, the user must not blindly repair, should notify the repair department of our company, by professional personnel to check the repair.

3. the inner working area and the surface of the equipment should be rubbed regularly to keep clean and increase the transparency of the glass. Do not rub the exterior oven with acid, alkali or other corrosive solution,neutral detergent can be used to clean.

4. if the oven is not used for a long time, the power cord should be removed to prevent damage to the equipment. and should be run regularly (general quarter) according to the use conditions for 2-3 days to remove the moisture of the electrical parts and avoid damage to the relevant devices.

5. the top of the oven is the electrical control cabinet, which is convenient for centralized inspection and maintenance. Please contact us for confirmation before maintenance.

* The articles are for personal opinion only and are not for technical reference. The specific operation should be carried out under the guidance of technical personnel.*

Copyright © 2001-2021 Symor Instrument Equipment Co., Ltd. All Rights Reserved